Tabla de contenido
Publicidad
IRON & WIDE IRON booklet_Layout 3 12/07/2016 13:27 Page 6
Using your Iron to smooth, flick, curl or straighten
•
Remove your iron from its heat resistant guard.
•
Plug into the mains and turn on using the power switch.
•
A light will glow and remain green on the middle setting on the temperature control panel, lower lights on the
temperature panel will flash then remain green once the selected temperature is reached.
•
To select a different temperature, press the temperature switch up or down.
•
Indicator lights will flash green and then glow steadily when the desired temperature is reached. Do not use
until the indicator light has stopped flashing, allow the iron to heat or cool as needed.
The maximum temperature can be reached within 20 seconds.
•
When the iron has reached your selected temperature, begin styling. Only use the iron on clean, dry hair.
•
When you have finished styling turn off the iron using the power switch and unplug from the mains power supply.
•
After use place the iron into its heat resistant guard and store in a safe place.
•
Never wrap the cord around the iron
•
All Cloud Nine® Irons are supplied with a standard two pin Europlug but have been fitted with a UK 3 pin
adaptor. To use your Iron in a country outside of the UK, simply remove the screw that is positioned
between the 3 pins and remove the adaptor from the 2 pin plug.
Publicidad
Tabla de contenido
