Uline H-9466 Guia De Inicio Rapido página 3

LOCKING THE BATTERY COMPARTMENT
IMPORTANT! If the smoke detector does not
sound during testing, do not lock the battery
compartment. Install a new battery and test
again. If it still does not sound, replace the
smoke detector immediately.
1. Using needle-nose pliers or a utility knife, detach
one locking pin from mounting bracket.
(See Figure 5)
Figure 5
Locking Pins
2. Insert locking pin into notch on base of smoke
detector to attach mounting bracket. (See Figure 6)
Figure 6
PAGE 3 OF 9
INSTALLATION CONTINUED
UNLOCKING THE BATTERY COMPARTMENT
1.
2. Gently pry the smoke detector away from the
1-800-295-5510
uline.com
Insert a flathead screwdriver between the mounting
bracket pin and the mounting bracket.
bracket by turning both the screwdriver and the
smoke detector counterclockwise at the same time.
0721 IH-9466