Correct Use; Cleaning And Maintenance - Hotpoint WDD 8640 B EU Guía De Salud Y Seguridad Y Instalación

by a qualified technician
in compliance with the
manufacturer instruction and
current safety regulations.
Contact an authorized service
center.
Do not operate this appliance
if it has a damaged mains cord
or plug, if it is not working
properly, or if it has been
damaged or dropped. Do not
immerse the mains cord or plug
in water. Keep the cord away
from hot surfaces.
The electrical components
must not be accessible to the
user after installation.
Do not touch the appliance
with any wet part of the body
and do not operate it when
barefoot.
ELECTRICAL CONNECTIONS
FOR GREAT BRITAIN AND
IRELAND ONLY
Fuse replacement
If the mains lead of this
appliance is fitted with a BS
1363A 13amp fused plug, to
change a fuse in this type of
plug use an A .S .T .A . approved
fuse to BS 1362 type and
proceed as follows:
1 .Remove the fuse cover (A)
and fuse (B) .
2 .Fit replacement 13A fuse into
fuse cover.
3 .Refit both into plug.
Important:
The fuse cover must be refitted
when changing a fuse and if
the fuse cover is lost, the plug
must not be used until a correct
replacement is fitted. Correct
replacement are identified by
the colour insert or the colour
embossed in words on the base
of the plug. Replacement fuse
covers are available from your
local electrical store.
For the Republic of Ireland
only
The information given in
respect of Great Britain will
frequently apply, but a third
type of plug and socket is also
used, the 2-pin, side earth type.
Socket outlet / plug (valid for
both countries)
If the fitted plug is not suitable
for your socket outlet, contact
After-Sales Service for further
instruction. Do not attempt
to change the plug yourself
.This procedure needs to be
carried out by a qualified
technician in compliance with
the manufacturer's instructions
and current standard safety
regulations.

CORRECT USE

Do not exceed the maximum
load allowed. Check the
maximum load allowed in the
programme chart.
Turn off the tap when not in
use.
Do not use any solvents
(e.g. turpentine, benzene),
detergents containing solvents,
scouring powder, glass or
general purpose cleaners,
and flammable fluids; do not
machine wash fabrics that have
been treated with solvents or
flammable liquids.
Do not overdry the laundry
Fabric softeners, or similar
products, should be used as
specified by the fabric softener
instructions.
Do not dry unwashed items.
CLEANING AND
MAINTENANCE
The appliance must be
disconnected from the power
supply before carrying out
any cleaning or maintenance
operation.
Never use steam cleaning
equipment.
EN
5