Pre-Operation Instructions - BE Power Equipment 15" WHIRL-A-WAY Manual Del Operador

pre-operating instructions
Before You Begin
Prior to initial operation of the unit carefully read the information
outlined in the operation instructions.
• Ensure that all components are in good working order and that they
operate safely.
• Do not use cleaner if any part is not in proper working condition.
• No modifications permitted on the surface cleaner.
• Before operation test the cleaner at low pressure (1,500 PSI) to ensure
you can operate safely at high pressures.
The surface cleaner you have purchased connects directly to a 1/4" quick
connect coupler, operating to a maximum of 3,500 PSI.
This product uses extreme water pressure and water force. This may
cause kickback when using the cleaner.
This 15" Whirl-A-Way is designed to operate with cold water pressure
washers. We do not recommend the use of hot water as the nylon brush
skirt will soften and wear prematurely, voiding any warranty.
Before operation ensure that the pressure washer is on low pressure
when first using the 15" Whirl-A-Way. Adjust pressure with adjustable
unloader.
Intended Use
The Whirl-A-Way is suitable for cleaning floors and walls in conjunction
with a high pressure cleaner.
• Recommend Operating pressure: 1,500-3,500 PSI
• Ideal flow: 1.4 to 3.0 GPM (3.5 GPM Max)
• Maximum pressure: 3,500 PSI
• Maximum water temperature: 85°C/180°F
* Never exceed maximum operating pressure and temperature.
Surface Cleaner Care
• Protect from frost/freezing.
• Ensure bristles are not deformed during storage.
Please recycle the packaging
The packaging materials are recyclable.
WARNING
5