Backrest Adjustment - Nuna arra Manual Del Usuario

Shoulder harness straps must be nearest to your
childs shoulders (19), but not above the shoulder
line. (20)
If the Shoulder harness straps are not at proper
height, the child might be ejected from the
enhanced child restraint if there is a crash.
Pull the head support adjustment lever (21),
meanwhile pull up or down the head support until it
snaps into one of the 10 positions. The head support
positions are shown as (22).

Backrest Adjustment

There are 3 angles for the backrest.
Please press backrest adjustment button to heighten
or lower the backrest. (23)(24)
Securing Child
Use Infant Inlay
After the child is placed in the enhanced child
restraint, check whether the shoulder harness straps
are set to the proper height.
17 ARRA instruction
We recommend
using the infant
inlay while the baby
is under 60cm or
until they outgrow
the inlay.
1
While pressing the webbing adjustment button,
pull completely the two shoulder harness straps
of the enhanced child restraint. (25)
2
Unlock the buckle of the harnesses by pressing
the red button. (26)
3
Place child into the enhanced child restraint and
lock the buckle. (27)(28)
4
Tighten the shoulder harness straps by pulling the
adjustment webbing. (29)
Make sure the space between the child and the
shoulder harness straps is about the thickness of
one hand.
Canopy
1
To assemble the canopy, snap the canopy to the
rear of seat. (30)
2
To open the canopy, pull the canopy toward, and
to close the canopy, push it back. (31)
3
The canopy window can be opened for
ventilation. (32)
Detach & Assemble Soft Goods
see images (33)-(44)
To re-assemble the soft goods, reverse the
aforementioned steps.
ARRA instruction 18