Publicidad
Install the Fixture
1A
MOUNTING PLATE STUD
Secure the mounting plate to the junction box.
1
Connect the fixture to a suitable ground in accordance to local electrical codes.
2
3
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
4
Place the fixture base onto the mounting plate studs and secure it in place with the cap nuts.
5
Install the shade onto the threaded studs and secure it in place with the shade cap nuts.
6
JUNCTION BOX
4
CAP NUT
6
3
5
5
SHADE
CAP NUT
2
MOUNTING PLATE
FIXTURE BASE
THREADED STUD
SHADE
6
Publicidad
