Pleasant Hearth Lorraine Manual Del Usuario página 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 35 minutes
Tools Required for Assembly: Wrench (included), Phillips Screwdriver (not included)
ASSEMBLY INSTRUCTIONS
1. Attach Leg (I) to Support Ring (J) through pre-drilled
holes, using M6 Nut (DD).
Repeat with the three remaining legs (I).
Do not tighten at this time.
Hardware Used
DD
M6 Nut
2. Connect Table Parts (G) into a ring as illustrated,
using eight M6 x 40mm bolts (AA) and M6 nuts
(DD). Tabs on each section should overlap the
proceeding section. Do not tighten at this time.
Hardware Used
M6 x 40mm
AA
Bolt
DD
M6 Nut
1
x 4
2
x 8
x 8
4
I
DD
J
G
AA
DD