Setting The Gain - Clarion APX Serie Manual Del Usuario

Two-channel high power system
In this application, the APX2121E is used to drive a pair of subwoofers.
Subwoofer

Setting the gain

After completing the installation, follow these steps to set the gain control and perform
the final system checks.
1. Turn the gain control all the way counterclockwise.
2. Turn the vehicle's ignition switch on.
3. Turn the source unit on.
4. Set all tone or equalization controls to flat positions and turn loudness off.
5. Play a CD or radio and set the volume control to 75% of full level.
6. Slowly increase the gain control. Stop when you hear a slight audio distortion.
Note:
If the system uses an equalizer, set all frequency
controls to the flat position
Subwoofer
.
13