Operation Instructions - Silent Gliss SG 5100 Instrucciones De Funcionamiento

EN —

OPERATION INSTRUCTIONS

Please select channel for multi-channel transmitter before operation 0.5s is
needed for up/down converting, max single running time is 4 min.
PROGRAMMING
1
1. — Press the PROG button 1s.
2. — Red light flash slowly, please do the next step within 10s.
3. — Press UP of transmitter.
4. — Blue light flash 3 times. Programmed.
CHANGING DIRECTION
NOTE
In the case of the motor goes in wrong direction.
1
1. — Press STOP on programmed transmitter and hold for 5s.
2. — Red light flash slowly, please do the next step within 10s.
3. — Release and press STOP again.
4. — Blue light flash 3 times. Changed.
4
2
2
3
3
4
4