Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To Set Up
NOTE: Use 7 3/4 oz disposable butane/propane mix cylinder only. Do not connect
to bulk LPG systems. The LP-gas cylinder(s) used with catalytic heaters must be
constructed and marked in accordance with the specifications for LP-gas cylinders
of the U.S. Department of Transportation or Transport Canada, CAN/CSA B339.
Unit includes Heater
Assembly, Regulator
Assembly, and Base.
The LPG tank is not
included.
Attach Heater Assembly to Regulator Assembly hand tight.
Heater
Regulator
Base
Turn HEATER VALVE to OFF.
Place fuel cylinder on a solid
surface. Press Base over fuel
cylinder.
CAUTION
• SERVICE SAFETY
• Keep all connections and fittings
clean. Inspect LPG cylinder and
heater LPG connections for
damage before attaching.
• During set up, check all connections
and fittings for leaks using soapy
water. Bubbles indicate a leak. Never
use a flame.
Use both hands to firmly press
the Base in place.
Base
Note: Using the heater without the
Base on the fuel cylinder will void
compliance with CAN1-11.3-M79.
5
Publicidad
Tabla de contenido
