Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
S
t
a
r
t
t
o
u
s
e
S
t
a
r
t
t
o
u
s
e
1. Install Battery
1. Open the battery lid
2. Put 3 pieces of AAA (7#) batteries in according to the polarity instruction.
3. Insert the front end of the battery lid into the battery stack, press the back end of the
battery lid and then push the battery lid inwards to allow the battery lid to closely attach the
body.
2. Use SD Card
1. Push the SD card into the slot until it is completely inserted according to instructions.
2. Lightly press the card end inwards and the SD card will eject.
Note: This camera have build in nand flash memory, the photos was snapped will
save to memory card first until draw out it.
3. Choose Focus Mode
Press the macro switch on the top of the body and then you can switch between the
macro and normal focus.
1. Macro: it is suitable for shooting objects 15cm ~ 25cm away from the lens; when using,
push the macro switch to the end marked with
2. Normal focus: it is suitable for shooting objects 1.4m away from the lens; when using,
push the macro switch to the end marked with
4. Power on and off
1. Power on: press the power key for a while, light the screen and the unit will be power
on.
.
.
2
Publicidad
Tabla de contenido
