MO-EL FURBI Uso Y Mantenimiento página 8

firmly fix the appliance using the screw supplied.
5.Assemble the wall support joining its two halves together by fitting
the screws supplied into holes (A).
FUNCTIONING
1.Remove the hairdryer from its support with the handle.
2.Switch the appliance on using the "ON / OFF" switch (C) located on
the wall support.
3.Press button (D) at the front of the handle for warm air. Warm air will
continue to flow as long as the button is held down.
4.Press the "MIN / MAX" switch (E) at the rear of the handle to adjust
the power of the appliance.
5.Two power sockets are incorporated into the wall support, one for
over 230 V (F) and one for less than 115 V (G), which can be used for
electric shavers and similar appliances.
The power sockets on this appliance may be used for appliances with a
power rating no greater than 10 W.
8