Uline H-5942 Instrucciones De Montaje página 2

2. Pre-drill holes to fasten receptacle to post. Use
holes on the slat panel provided with receptacle to
determine spacing.
3. Mount waste receptacle and slat panel to the lower
section of post with included lag bolts and washers,
using the pre-drilled holes. (See Figure 2)
Figure 2
4. Pre-drill holes for bag dispenser in desired location,
towards the upper section of post.
5. Using a socket wrench, mount bag dispenser
through top opening to post with included lag bolts
and washers. (See Figure 3)
Figure 3
PAGE 2 OF 6
ASSEMBLY CONTINUED
Post
Slat Panel
Inner Metal of
Receptacle
Back of
Dispenser
Post
6. Unlock dispenser top and fill with two rolls of Uline
Dog Waste Bags (S-21319). Lock dispenser top.
7. Reach through the two hole openings and find
edges of bags. Pull until bags exit dispenser.
(See Figure 4)
Figure 4
8. Mount optional sign to the top of the post using
preferred method. Hardware not included.
(See Figure 5)
Figure 5
1-800-295-5510
uline.com
0621 IH-5942