LevelOne WAP-6102 Guía De Instalación Rápida página 3

3. Select Use the following IP Address radio
button and then enter the IP address
(192.168.1.21) and subnet mask (255.255.255.0).
Ensure that the IP address and subnet mask are
on the same subnet as the device.
4. Click on the OK button to close this window, and
once again to close LAN properties window.
Logging In
1. To configure the device through the web-browser,
enter the IP address of the AP (default:
192.168.1.1) into the address bar of the
web-browser and press Enter.
2. After connecting to the IP address, the
web-browser will display the login page. Specify
admin as the default User Name and Password,
and then click on the Login button.
Administration
1. Click on the Admin link under the Management
menu. This option allows you to create a new
password for the device. For security it is highly
recommended for security reasons.
2. Old Password: Specify the old password into the
first field. The default password is admin.