Tabla de contenido
Publicidad
3
Drill four pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm).
Be sure to drill into the center of the studs.
4
2 ¾ in. (70 mm)
1/8 in.
(3 mm)
Install wall plate
Tighten the lag bolts only until they are pulled firmly against the wall plate.
All four lag bolts
movement of the wall plate
fastened to the wall before continuing on to the next step.
Go to STEP 3 on PAGE 12.
06
using four lag bolts
06
CAUTION:
Avoid potential personal injury or property damage!
MUST BE firmly tightened to prevent unwanted
07
. Ensure the wall plate is securely
06
08
07
and four washers
07
08
.
9
Publicidad
Tabla de contenido
