Publicidad
STEP 2B Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injury or property damage!
●
Mount the wall plate
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
Minimum horizontal space between fasteners: 16 in. (406 mm)
1.
Position the wall plate
2.
Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
1
13
10
directly onto the concrete surface.
13
on the wall at your desired height. Level the wall plate
13
UP
Solid Concrete or Concrete Block Option
and mark the hole locations.
13
2
3 in. (75 mm)
3/8 in.
(10 mm)
Publicidad
