ProKlima HF-106631.2 Manual De Instrucciones página 75

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
How to clean the filter system:
1)
Clean the ceramic filter after using 1000L water regularly. Depend on the water quality, if the ceramic balls
are dirty, the filter needs to be cleaned more frequently.
2)
It can be dipped in vinegar about 5 minutes. Then rinse it with clean water.
3)
Put the filter under the sun for 4~6 hours.
4)
You can purchase replacement filters in your local Bauhaus store.
How to clean the transducer:
1) Put 5-10 drops of decalcifying agent or citric acid on the surface of the transducer; wait for 2-5 minutes.
2) Brush out the surface and then rinse the transducer with water.
How to clean the water basin:
1) Clean the water basin with soft cloth and use a decalcifying agent or citric acid.
2) If the scale deposit is covered in any place of the water basin, drop the decalcifying agent or citric acid on
the scale deposit and clean it out with a brush.
3) Rinse the water basin with water.
TROUBLE SHOOTING GUIDE
Any trouble found in normal operation; please kindly refer to the following points:
Trouble
Moisture on the floor around the
unit
Mist smells abnormally
Insufficient mist evaporation
Possible reasons
Device is set too high, the air
cannot
absorb
the
moisture, it comes to rain down.
Plastics might smell during first
applications
Dirty water or long time staying
water.
Residual smell from diffusing
aroma oil on the aroma cotton.
Too much sediment in the water
basin.
Water is too dirty or water kept too
long in the tank.
The nozzle could be blocked.
There is natural or artificial air
replacement in the room which
interfere the increase of %RH.
- 74 -
Possible solutions
Reduce moisture evaporation.
expelled
Take out water tank, open cover,
let it stay 12 hours in cool
position.
Cleaning water tank, fill in clear
water.
Remove the aroma cotton, rinse it
under clean water and allow it to
dry.
Clean transducer and water basin
Clean water tank, change to fresh
clear water.
Remove any blocking items from
the nozzle.
Check if doors and windows are
closed.
Check if there is no air
conditioning working in the room.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

22451028

Tabla de contenido