Polk STRIKER PROZX Guia Del Usuario página 4

PS4
Use the 1 m console cable and connect it from the Striker Pro into the in-line
volume control with mic attenuator device. Then, connect it into the 3.5 mm
input jack on the PlayStation
headphone plug is pushed all the way in).
Note: To adjust the microphone level, go to "Settings," then "Device Settings,"
then "Audio Devices" and adjust the microphone level.
Wii U
Use the 1 m console cable and connect it from the Striker Pro into the 3.5 mm
input jack on the WiiU controller (please make sure the headphone plug is
pushed all the way in).
4
Dualshock 4 controller (please make sure the
®
Use the following instructions to route all audio output
to headset:
1. Press and hold the home button for 3 seconds
(Mic Boost should be off), then select "Adjust Devices"
and press the "X" button.
2. Select "Output to Headphones" and press
the "X" button.
3. Choose "All Audio" and press the "X" button.
4. Select in-line volume control with mic attenuator
(Headphones).
5. Select Microphone (Level Menu).