Declaration Of Conformity - SIOUX SC41011A Manual De Instrucciones

• Sluggish or erratic operation
Flush tool out with a small amount of petroleum solvent and operate for a few seconds, then re-lubricate the tool
using air motor oil. If the tool still does not perform correctly it will need to be disassembled and repaired.
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
July 1, 2003
Murphy, North Carolina, USA
Date and place of issues
SOUND AND VIBRATION READINGS
*Sound Pressure
Catalog No. dBA
SC41011AL-C 94.7
SC41011AL-N5 94.7
SC41011AU-C 94.7
SC41011AU-N5 94.7
*per PN8NTC1

DECLARATION OF CONFORMITY

SC41011AL-C, SC41011AL-N5, SC41011AU-C, SC41011AU-N5
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Gerald E. Seebeck
Sioux Tools Inc.
Name and position of issuer
*Sound Power
dBA
106.2
106.2
106.2
106.2
*per PN8NTC1 *per ISO 8662
President
2
*Vibration
2
m/s
10.9
9.95
10.9
9.95
Signature of issuer