How To Use The Nitetime Plus; Choose The Timer Setting - Hunter NiteTime Plus Easy Manual De Operación

All manuals and user guides at all-guides.com

HOW TO USE THE NITETIME PLUS™

Choose the Timer Setting

Before plugging the timer into a wall outlet, choose the desired time
program using the Program dial. These instructions apply to both
lamps and small electronics. Once set, the program never needs
resetting for Daylight Savings Time or power outages.
If a timed program is not needed, set the Program dial to 1 Power On
and use the lamp switch to turn the lamp On and Off. To revert back
to a timed program, change the Program dial to one of the following
settings:
2 – Dusk +2hr turns power On at dusk, turns power off 2 hours later.
3 – Dusk +4hr turns power On at dusk, turns power off 4 hours later.
4 – Dusk +6hr turns power On at dusk, turns power off 6 hours later.
43118-01 r100207
8