König Electronic CMP-WNUSB21 Manual De Uso página 5

If the access point you selected does not use encryption, you'll be connected to
this wireless access point within one minute. If the access point you selected uses
encryption, please proceed to step 3.
2. If the wireless access point does not have SSID, you'll be prompted to input it now.
Please ask the owner of the wireless access point for the exact SSID and input it
here. Then click 'OK'. If the SSID you provided here is wrong, you'll not be able to
connect to this access point, and you'll be prompted to enter it again.
3. If the wireless access point uses encryption, you will be prompted to input its WEP
key or WPA preshared key.
4. Please ask the owner of the wireless acces point for the correct key. Input the key
and click 'OK'. By checking the 'Show Password' box, the encryption key you enter
here will be displayed enabling you to check it.
If the key you enter is wrong, you will not be able to connect to this wireless access
point.
Authentication type will be selected by the access point automatically, please
don't change it.
5. If you successfully connect to the wireless acces point, you'll see a
of the wireless device.
5
 symbol in front