Connecting Your Ipod - Yamaha YDS-12 Manual De Instrucciones

■ Connecting your iPod

Insert the dock connector port of your iPod into the iPod connector terminal of this unit
firmly.
Refer to the owner's manual supplied with your Yamaha dock-compatible audio component or
iPod for operating information.
Notes
• When this unit is connected with an
iPhone and placed near the Yamaha
dock-compatible audio component,
noise may occur. Place this unit away
from the Yamaha dock-compatible
audio component.
• Make sure that the output level of the
dock-compatible audio component is
set to minimum.
• To protect the dock connector from damage,
do not twist or sway back and forth your iPod
when inserting or taking it off from this unit,
and be careful not to knock over this unit
when your iPod is inserted.
• Always use the correct iPod dock adapter
(this may be the one supplied with your
iPod, one supplied with this unit, or a
commercially available adapter). Using
4
En
this unit with the wrong iPod dock adapter
may result in a poor connection and
malfunction.
• Do not take off your iPod from this unit
when you play back the music, photo, or
movie stored on your iPod with the dock-
compatible audio component.
• Connect your iPod without any other iPod
accessories (such as headphones, a wired
remote control, an FM transmitter etc.)
connected.
• It is recommended that you update your
iPod software before using it with this unit.
• If you set the Mode switch to B and insert
your iPhone, an alert message appears on
the iPhone screen. Select "No" on the
screen to proceed.