How To Transport The Machine; Machine Set-Up - Clarke American Sanders FA-8 Manual Del Operador

ENGLISH
EN

How to Transport the Machine

Transporting the Machine With Limited Cargo Area:
1. To transport the machine,remove the handle,dust pipe and
bag. Follow steps in fi gure 1.
2. Lift chassis with transport handles and place in cargo area.
WARNING!
Machine is heavy (95 lbs.). To avoid injury or damage, grasp
transport handles fi rmly; use proper lifting technique.
3. Secure chassis to prevent movement in cargo area. Place
handle and dust pipe in cargo area.
-6-

Machine Set-up

To set up the machine follow the steps called out in fi gure 1:
1. Familiarize yourself with the machine. Read all danger, warning,
and caution statements as well as the Operator's Manual. If
operator is unable to read this manual, have the manual explained
before operating.
2. Install handle (1) and fasten latch (2).
3. Insert control link into notch and slide collar to pin (3). Raise
sanding drum with control lever.
4. Install dust tube (4) into machine and dust bag (5) onto dust
tube..
5. Connect the handle pitgtail (6) to the motor cord (7). Align
ground pin, insert and twist.
Figure 1
®
American Sanders Operator's Manual (EN) - FA-8
Clarke