Princess 332938 Manual De Instrucciones página 9

Congratulations!
You have purchased a Princess appliance.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this appliance
for many years.
Description (fig. A)
Your 332938 Princess vacuum cleaner has
been designed for vacuuming dry substances.
The appliance is not suitable for vacuuming
wet substances. The appliance is suitable for
indoor use only. The appliance is suitable for
domestic use only.
1. On/off button
2. Mains cable rewind button
3. Dust compartment
4. Release button (dust compartment)
5. Handgrip
6. Hose
7. Tube
8. Extension tube
9. Airflow control switch
10. Suction nozzle
11. Floor surface selector
12. Wheels
13. Parking bracket
14. Crevice nozzle
15. Hose connection
16. Locking knob (extension tube)
Assembly (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly, always switch off the
appliance and remove the mains plug from
the wall socket.
Mounting and removing the dust
compartment (fig. A)
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the appliance without the dust
compartment.
• To remove the dust compartment, keep
the release button (4) pressed and pull the
dust compartment (3) from the appliance.
• To mount the dust compartment, insert
the dust compartment (3) into the
appliance until the release button (4) clicks
into place.
Mounting and removing the hose
(fig. A)
Before you proceed, we would like you to
focus your attention on the following notes:
- Before mounting the hose, make sure that
the dust compartment is inserted into the
appliance.
• To mount the hose (6), insert the hose
outlet into the hose connection (15) until
the release buttons click into place.
• To remove the hose (6), keep the release
buttons pressed and pull the hose outlet
from the hose connection (15).
Mounting and removing the tube
(fig. A)
• To mount the tube, insert the hose (6) into
the tube (7).
• To remove the tube, pull the hose (6) from
the tube (7).
Mounting and removing the
suction nozzle (fig. A)
The suction nozzle can be mounted to the
extension tube.
• To mount the suction nozzle, insert the
extension tube (8) into the suction nozzle
(10).
• To remove the suction nozzle, pull the
extension tube (8) from the suction nozzle
(10).
Mounting and removing the
crevice nozzle (fig. A)
The crevice nozzle can be used for vacuuming
in narrow and hard-to-reach places. The crevice
nozzle can be mounted to the hose or to the
extension tube.
• To mount the crevice nozzle to the hose,
insert the hose (6) into the crevice nozzle
(14).
• To mount the crevice nozzle to the
extension tube, insert the extension tube
(8) into the crevice nozzle (14).
9