Autophix OM126 Manual De Instrucciones página 18

Select On-board Monitoring in Diagnostic Menu and press ENTER
and the screen will display as shown below (Data will be different
everytime):
You can use UP or DOWN button to select an item and press ENTER,
the screen will display as shown below (Data will be different
everytime):
Press EXIT to return to Diagnostic Menu.
4.8 EVAP System Test
The EVAP test function lets you initiate a leak test for the vehicle's
EVAP system. The CReaderVI does not perform the leak test, but
signals to vehicle's on-board Computer to initiate the test. Before
using the system test function, refer To The vehicle's service repair
manual to determine the procedures necessary to stop the test.
EN
17