Horizon Global 76386 Instrucciones De Instalación página 4

1. Loosen lower fascia - Using T15 torxbit, remove (3) screws from bottom of lower fascia. Return (1) screw to vehicle owner.
2. Feed fasteners – (a) Using a flat head screwdriver, remove (2) clips of wiring cable from side of both frame rails. (b) Using utility knife, remove the caulking area as
shown in Figure 3. (c) Feed the carriage bolts ① and washers ② through access holes on both side frame rails using the pull wires ⑤, see Figure 1 & 2. Leave pull
wires attached.
Figure 3
©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 4 of 18 76386NP 11-25-20 Rev. A