Tabla de contenido
Publicidad
English
Safety Information
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide
for future reference.
Hazard Levels
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NO
NO TICE
NO
TICE
TICE
Indicates a situation which, if not avoided, could
result in damage to property.
Other Message Levels
Important
Indicates significant information which is essential
for the product to function correctly.
Note
Indicates useful information which helps in getting
the most out of the product.
Safety Instructions
WARNING
•
The Axis product shall be installed by a trained
professional.
NO TICE
TICE
NO
NO
TICE
•
The Axis product shall be used in compliance
with local laws and regulations.
•
Store the Axis product in a dry and ventilated
environment.
•
Avoid exposing the Axis product to shocks or
heavy pressure.
•
Do not install the product on unstable poles,
brackets, surfaces or walls.
•
Use only applicable tools when installing the Axis
product. Using excessive force with power tools
could cause damage to the product.
•
Do not use chemicals, caustic agents, or aerosol
cleaners.
•
Use a clean cloth dampened with pure water for
cleaning.
•
Use only accessories that comply with the
technical specification of the product. These can
Available from A1 Security Cameras
be provided by Axis or a third party.
www.a1securitycameras.com email: sales@a1securitycameras.com
•
Use only spare parts provided by or recommended
by Axis.
•
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
Transportation
NO
NO TICE
NO
TICE
TICE
•
When transporting the Axis product, use the
original packaging or equivalent to prevent
damage to the product.
Requirements for Compliance with
UL294 6th Edition
This section contains information and instructions
required for UL compliance. To make sure the
installation is UL compliant, follow the instructions
below in addition to the general information and
instructions provided throughout this document. In
cases where pieces of information contradict each
other, the requirements for UL compliance always
replace general information and instructions.
Safety Instructions
•
The Axis product shall be installed and serviced
by a factory trained professional.
•
The Axis product shall be installed within the
protected premises (secured area).
•
If the Axis product is used together with
AXIS A9801 Security Relay, the Axis product
can be used in perimeter installations.
AXIS A9801 Security Relay improves security
for doors controlled by Axis network video door
stations. AXIS A9801 is placed on the secure
side of the door. At any attempt to tamper
with the door station, AXIS A9801 cuts the
connection to the door strike and ensures that
the door remains securely locked.
•
This product must be powered by a UL294
Listed Class 2 power limited PoE injector,
providing 44–57 V DC, 15.4 W.
•
All wiring methods shall be performed in
accordance with NFPA70, local codes and
authorities having jurisdiction.
•
Recommended test method to verify that the
door station can receive calls and unlock doors:
Press the call button and verify that the call is
received on the operator side. Unlock the door
from the operator side, and verify that the door
is unlocked.
Test frequency: once a year.
•
When the Axis product has reached the end of
its useful life, dispose of it according to local
laws and regulations. The product should not
be disposed of together with household or
commercial waste. See Disposal and Recycling
on page 10.
•
Battery
-
The 3.0 V lithium
battery used by
the Axis product is
a UL Recognized
component:
Publicidad
Tabla de contenido
