Beper RI.504 Manual De Instrucciones página 11

Fireplace stove Use instructions
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening, to avoid any risk of electric shock or fire or damage
the appliance.
To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not place the appliance on soft surfaces (such as beds
or cushions), where openings many become blocked.
Keep the appliance away from inflammable materials and liquids (ga-
soline, etc.).
Use the appliance only as described in this manual. Any other use
may cause fire, electric shock, or injury to persons.
Danger-high temperatures may be generated under certain
abnormal conditions. Do not partially or fully cover or ob-
struct the front of the appliance.
Replacement of the lamps should be done only while the heater is
disconnected from the supply circuit.
Unpacking and installing the appliance
Carefully remove the appliance from its package.
To mount the standing feet, align the 3 holes found on each foot with
the holes found on the lower side of the appliance, and with a Phillips
screwdriver and the provided screws, proceed to fasten them until
firmly fixed.
Place the appliance as so the front part through which the heat is
radiated is at least 1 m away from furniture, curtains and other flam-
mable objects.
Note: the knob found on the lower front part of the appliance is
just for decoration; to avoid damaging and breaking, do not pull
it.
Ensure there is a grounded socket nearby the appliance.
Note: Never use extension lead. The main cable must remain at the
back of the appliance and must not be in contact with any hot ele-
ments.
Safety instructions
Only use the appliance in accordance with the instructions provided
in this manual.
11
EN