ACME KE300 Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
7. Do not use any appliance with damaged cord or plug or after the appliance malfunctions.
Return the appliance to the nearest authorized service center for examination, repair or adjustment.
8. Be careful when opening the lid for refilling when the kettle is hot.
9. The kettle is for household uses only, do not use it outdoors.
10. Avoid contact with steam from the spout when the water is boiling or just after the kettle has switched off. DO
NOT be anxious to uncover the lid.
11. Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may occur if the lid is
removed during the boiling cycles.
12. Do not use the appliance for other than intended use.
13. The kettle can only be used with the stand provided.
14. If the kettle is overfilled, boiling water may over boil.
15. The use of accessory attachments that are not recommended by the appliance manufacturer may result in fire,
electric shock or personal injury.
16. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
operation
It is recommended to use the kettle for several times following instructions given below and to remove remaining
water before first usage. This will remove any materials or dust remained in the appliance from the manufacturing
process.
1. Open the lid by turning the Lid up while pressing the Lid button and pour water into the kettle. Then replace the
lid, otherwise the kettle would not be able to turn off the power automatically after water has boiled.
Caution: the filled water level must be between the "Max" and "Min" level as indicated on the housing. Too little water
will damage the heat element and if the kettle is overfilled, boiling water may splash out.
2. Replace the kettle on the power base and connect to power supply. Position the kettle so that the spout of the
All manuals and user guides at all-guides.com
GB
5

Publicidad

Tabla de contenido
loading

Productos relacionados para ACME KE300

Tabla de contenido