Remote Receiver Controls & Connections - Acoustic Research WHT24 Manual De La Instalación Y De La Operación

Remote Receiver Controls & Connections
The remote receiver controls and connectors are shown in Figure 6.
FIGURE 6 - Remote Receiver Controls & Connections
• L AUDIO OFF R: Set switch to indicate if the attached speaker will represent the
L or R rear surround position or set to AUDIO OFF.
• Power Adaptor In: Connect the enclosed power adaptor to the wireless receiver,
then plug the power adaptor into your power outlet.
• LINK: Press LINK to choose a new system address when using the LINK button
on the transmitter (see "Resetting the Channel Using the LINK Switch" on
page 13).
• ON OFF: Turn the wireless receiver on or off.
ON OFF ON OFF
AUDIO
L R
OFF D C IN D C I N
LINK
page 9
WHT24