Media Tablet Ultimate II Manual
Left hand USB port
•
Place the tablet on your desk in the direction you like to use it.
•
Select the USB port like explained in above picture by using the USB Socket Slider.
•
Connect the Media Tablet Ultimate II to your PC or MAC with the supplied USB
cable. It's recommend not to connect to Hubs or front USB ports of your PC
tower.
•
After connection the big white Mode‐ LED will pop up and the small white
left/right hand indicator LED.
Knowing your Tablet
Working Area: The working area is the active area where the pen response. The usage
is different to mouse. The working area is equal with your monitor, you can directly
point on the place by moving the pen. If you move the pen to left bottom corner, the
pointer on your display directly goes to this point. This makes work much more
efficient and much quicker than using a mouse.
USB Socket Slider
www.aiptek.eu
Right hand USB port
Page 5
EN