RAMATTI VENUS Comfort Modo De Empleo página 12

•
pull the crotch belt with the open central part of the buckle and the belt used to regulate
lenght through the opening in the cover – fig.
•
remove the cover.
The cover can only be washed by hand, in a temperature not exceeding 30°C, using mild
detergents – preferably washing liquid. Do not spin. Do not place in a dryer.
IV.2 Safety seat maintenance
A part of the safety seat is made of plastic and it can be cleaned using slightly warm water
with soap. Do not use aggressive cleaning agents.
IV.3 Putting on the cover
In order to put the cover back on, please follow the same steps as when removing the cover
– – but in reverse order.
paragraph IV.1
After careful placement of the cover on the seat, attach the rubber finished edges in internal
hooks located under the back-rest, as shown on fig.
V. ADJUSTING THE POSITION OF THE SAFETY SEAT
For the child's convenience the
To set the desired position, press upward the lever under the frontal part of the seat and simul-
taneously pull forward or backward the main body of the safety seat. Release the lever when
the desired position has been reached and push until you hear a clear clicking sound – fig.
8 10
– and .
VI. WARRANTY
The VENUS Comfort
ECE R 44/03 and is suitable for the weigh of children: from 9 to 18 kg (group 1).
• The warranty is granted for the period of 24 months from the date of purchase.
• The warrantor ensures a good quality and appropriate performance of the product when used
in accordance with the manufacturer's intention and instruction manual.
• The warranty is granted only to the first user and cannot be transferred to other persons.
• Warranty claims due to faulty products are accepted by retail outlets.
• In case of malfunction, please take the product to a retail outlet together with the warranty
card signed by a dealer, and with the receipt or any other proof of purchase.
The warranty is not granted when:
• The product was not delivered to the manufacturer together with the original proof of purchase.
• The defects were caused by improper usage or maintenance, carried out in different manner
from that described in the instruction manual.
• The defects were caused by a car crash.
• The product was repaired by a third party.
• The serial number located on the seat part was damaged or removed.
VENUS Comfort
car seat conforms to the most restrictions European safety standards
26
;
24 25
& .
safety seat may be set in five positions.
11