To return to the previous display, touch
To close the setup menu, touch "SETUP."
To deactivate Zone × Zone
Select "SETUP" c "Disc" c "Zone × Zone" c
"OFF."
Notes
• Once (OFF) on the main unit or card remote
commander is pressed, Zone × Zone is deactivated.
• While Zone × Zone is activated, the following buttons
on the card remote commander become inactive:
(SRC), (MODE), (ATT), (VOL) +/–, (CAPTURE),
(SCREEN), (CLEAR), number buttons, m.
• While Zone × Zone is activated, the following are
deactivated.
– EQ7 (page 29)
– Balance/Fader (page 30)
– Pro Logic II (page 31)
– Intelligent Time Alignment (page 31)
– CSO (page 32)
– HPF, LPF (page 44)
– Output of SUB OUT
Tip
If "Zone × Zone" is assigned to (CSTM) on the main
unit, press it to activate/deactivate. For details on how
to assign the function on (CSTM), see page 41.
Listing up tracks/images
— LIST
Selecting a track/image
You can list up albums/tracks/images, and select
a desired one to play.
This function is convenient especially for the
disc in MP3/WMA/JPEG format containing
many albums/tracks, etc.
1
During playback, touch "LIST."
The list of tracks/images in the current disc/
album* appears.
To move to the upper level, touch
To scroll up/down the page, touch U/u.
* Only when playing MP3/WMA/JPEG.
2
Touch the desired track/image.
Playback of the selected track/image starts.
Note
.
The discs in the CD changer (if connected) cannot be
listed up.
Selecting a file type
If the disc contains multiple file types, only the
selected file type (audio/image) can be played.
The playback priority order of file type is
initially set to audio, then image (e.g., if the disc
contains audio files and image files, only audio
files are played). You can select the file type to
list up, then select the desired file to play.
1
During playback, touch "LIST."
2
Touch the file type icon to list up.
To list up MP3 and WMA files, touch
To list up JPEG files, touch
3
Touch the desired file.
Playback of the selected file starts.
.*
.
.
27