Control panel description:
INSTALLATION:
The motor replaces mechanical flush mount strap coilers with strap widths from 16mm up to max.
23mm.
Permitted strap length is max. 4.5m with a strap thickness of 1.3mm. (The large strap spool,
available as accessory, allows a strap length of 10m).
For shutters (without mechanical gear) with plastic framing up to approx. 6m².
Check shutter construction regarding proper operation. The shutter must open and close easily
when used manually. The strap must not be frayed; the shutter must not be wedged. Exchange
defective parts.
OPEN
RESET
CLOSE
LED
24h TIMER
Included in delivery:
• A two part electric strap coiler consisting of
1x flush mount coiler
1x control panel to be assembled
incl. plug and 1.5m of power cable (no fig.)
• Operating instructions (no fig.)
Hardware required:
• Scissors
• Screw driver
709156-1GB