Important Safeguards - Air Aroma Aromax Guia Del Usuario

Ocultar thumbs Ver también para Aromax:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Congratulations
Congratulations on purchasing your new Air Aroma Aromax diffuser. The Aromax allows
you to create an alluring ambience and tranquil atmosphere. Easily transportable, the
Aromax is the solution to most of your ambient scenting needs, both in professional
environments and at home.
Instructions
Read the instructions carefully and keep them in a safe place.

Important safeguards

Follow basic safety precautions, including:
1. This appliance must only be used by or under the supervision of a responsible adult.
2. Don't place the Aromax, cable, or plug in any liquid; don't use the Aromax in a bath-
room, near water or outdoors.

3. Position the power cord to prevent it from being a tripping hazard.

4. Don't use the Aromax for any purpose other than diffusing of Air Aroma aroma oils
and essential oils.

5. Use the Aromax with the adaptor supplied only.

4
Set up your Aromax
1. Remove your Aromax from the box and place on a flat surface.
2. 
 C arefully remove the top cone (item 1) from the unit base. The best way to remove
is by gently twisting and pulling the top cone. Take extra precaution when following this
step as the glass nebuliser (item 3) and silencer (item 2) are packaged inside the cone.
3. Carefully remove the glass nebuliser (item 3) and the silencer (item 2) from the
packaging
4. Add your selected Air Aroma essential oil blend or aroma oil to the glass nebuliser
by slowly pouring from the top. Keep the nebuliser under a 45-degree angle, and pour
gently, to prevent oil entering the centre tube.

DO NOT FILL PAST THE MAX symbol (item 4) on the nebuliser.
5. The glass nebuliser can contain up to 30ml of fragrance oil.

6. Insert the glass nebuliser into the base of the Aromax.
7. Carefully place the glass silencer (item 2) into the top of the glass nebuliser.
8. Plug the adapter into a power point and the DC connector into the Aromax (item 6).
9. 
 U se the two settings buttons (item 5) on the base of the Aromax to select the desired
duration and intensity of scent. (see 'Settings' section below)
10. Place the top cone back onto the base of the Aromax.

11. Your Aromax is now ready for your enjoyment
5

Publicidad

Tabla de contenido
loading

Tabla de contenido