Care And Maintenance; Faq - LOGICOM SPY-C Tank Manual Del Usuario

10 - Care and Maintenance

To clean your Spy-C Tank, power it off and wipe it down using a soft, dry cloth.
Make sure that there is no hair, dust, or other particles that could fit into the
wheels or in the camera's movement mechanism, which could cause the device
to stop working properly.
11 – FAQ
Why does the flashing blue indicator
take a long time to appear when
powering on the Spy-C Tank?
Why is the video transmission
quality so poor?
Why is video recording in black and
white?
Can I operate multiple Spy-C Tanks
in the same area?
Can I use the Spy-C Tank outdoors?
What happens if I receive a call
when I am on the Spy-C Tank control
screen?
Why can't I connect to my Spy-C
Tank?
The Spy-C Tank takes about 30 seconds to
initialize, after which the flashing blue
light appears.
The Spy-C Tank is at its maximum
-
range.
The Spy-C Tank's battery level is
-
low. Check the battery level using
the application, and change it if
necessary.
The antenna is not installed
-
correctly.
The area where the Spy-C Tank is
-
located may be overloaded with
Wi-Fi™ networks.
Make sure that the night vision mode is
disabled.
Yes, you can have multiple Spy-C Tanks in
the same area. Each has a unique SSID
that differentiates it from others.
The Spy-C Tank is recommended for
indoor use only.
It is not waterproof against weather or
humidity.
The application automatically stops so
that you can answer your call. To resume
control of your Spy-C Tank, simply restart
the Spy-C Tank application.
Make sure that you have:
Installed
-
the Spy-C Tank
33