English - Happy Plugs AIR 1 ANC Manual Del Usuario

ENGLISH

CONNECT AND USE
Charge your Air 1 ANC for a least 3 minutes before use.
1
Open the charge case and keep the earbuds in place to enter
2
pairing mode.
Select "Air 1 ANC" on your phone/device to pair. Your earbuds
3
are now ready to use.
!
The touch controls only work when the earbuds are placed
inside the ears due to the proximity sensor.
PAIR TO ADDITIONAL DEVICES
With the lid of the charge case open, press the button on the
1
bottom of the charge case for 5 seconds until the LEDs light up
in a rolling motion.
Select "Air 1 ANC" on your phone/device to pair. Your earbuds
2
are now ready to use.
RESET TO FACTORY SETTINGS
Delete "Air 1 ANC" from your Bluetooth devices list.
1
Make sure the charge case is charged. Put the
2
earbuds in the charge case.
3 With the lid of the charge case open, press and hold the button
on the bottom of the charge case for 10 seconds until all 4
LEDs flash 5 times.
The earbuds are now reset and ready to pair to your device.
Just follow the "Connect and use" steps.
CALLS
When using the Air 1 ANC for phone calls, both earbuds are active.
If you wish to use only one earbud during a phone call, please
!
put the other earbud into the charge case and close the lid.
NOISE CANCELLATION / TRANSPARENCY
Your headphones have three modes to cycle through with ANC as
the default mode.
ANC Mode (Active Noise Cancellation)
Reduce unwanted and disturbing sounds. Great for busy
environments.
Transparency Mode
Let ambience sounds in. Great for awareness.
Basic Mode
Turn off ANC microphones and rely on silicone eartips for noise
cancellation. Great for workouts.
TOUCH CONTROLS
2 s Transparency / Basic / ANC
× 1 Play / Pause
× 2 Next Track
× 3 Previous Track
R
× 1 Call Answer / Call End
× 2 Reject Call
x 3 Accept Call and Hold First Call
× 1
Volume Up
× 2
Volume Down
L
2 s
Siri / Google Assistant
CHARGE CASE BUTTON
5 s
Earphone Pairing Mode
10 s
Reset Earphones
Full instructions & FAQ available at: help.happyplugs.com
1