QNect QN-IPC04 Guia De Inicio Rapido página 4

Wi-Fi Smart indoor camera
Quick setup manual
Description
1.
Lens
2.
LED
3.
IR
4.
Speaker
5.
Micro USB port
Use
1.
Just download the app
store
2.
Start the app.
If you're using it for the first time, you'll have to register and create a new account.
3.
If you already have an account, log in using your login details.
in the upper-right corner in the app, and in the list select
4.
Click "+"
'Security > QN-IPC04'
: Insert a memory card into the memory card slot.
Optional
5.
Connect the camera to the included USB cable and the power supply unit. Plug the
power supply unit into a socket.
Wait a moment until the camera emits a signal tone and the LED begins to flash
6.
red quickly.
‐ If the camera does not make a "beep" sound, or the LED does not flash quickly :
press the reset button for > 6s until your hear a beep sound.
‐ If the camera makes a beep sound and the LED flashes quickly : Confirm in the
app.
Confirm that the camera LED is flashing.
7.
Now enter the name of your 2.4GHz WiFi network and the password, and confirm.
8.
The camera will now be connected. Once the connection has been established, the
9.
LED stops flashing and emits a constant blue light.
Now you can set up, control and configure your WiFi camera using the app.
10.
The device name will also be used for push notifications.
Note:
11.
Install the device on your desired location.
6.
7.
8.
9.
10.
"qnect home" from the Apple app store or the Google Play
Reset
Microphone
Micro-SD card slot [32Gb]
Temperature sensor
Metal support