Federal Signal Corporation 191X Serie Instrucciones De Instalación página 4

2. Replace the defective lamp with an exact replacement.
3. Replace the globe assembly. Ensure that the globe assembly is seated securely against
the gasket.
4. Test the light for proper operation.
B.Cleaning Enclosure.
Maintenance procedures sometimes require fixtures to be hosed down for good housekeeping.
The fixture should be cleaned periodically to maintain maximum light output. Only mild,
non-abrasive cleaning agents should be used. The glass globe should be regularly inspected for
scratches and chips, and, if damaged, must be replaced.
C. Lubrication.
Threaded Globe Assembly joint should be well lubricated with petroleum or a soap-thickened
mineral oil. If corrosive products have accumulated on the joint and cannot readily be removed
with solvents, the parts should be discarded and replaced.
Never use an abrasive material or file to remove corrosive products from threaded surfaces.
In extremely corrosive locations, equipment should be periodically inspected to guard against
unusual deterioration and pitting, since this may weaken the enclosure structurally.
D. Service.
The Federal factory will service your equipment or provide technical assistance with any
problems that cannot be handled locally.
Any units returned to Federal Signal for service, inspection, or repair must be accompanied by
a Return Material Authorization. This R.M.A. can be obtained from the local Distributor or
Manufacturer's Representative.
At this time a brief explanation of the service requested, or the nature of the malfunction,
should be provided.
Address all communications and shipments to:
E. Replacement Parts.
Description
Globe Assembly, Red
Globe Assembly, Amber
Globe Assembly, Blue
Globe Assembly, Green
Globe Assembly, Clear
Gasket
Light Socket
Grease, 8 oz. tube
Insulator
Screws, 8-32 x 7 / ", Phl. Hd.
8
Dome Guard
NOTE
WARNING
FEDERAL SIGNAL CORPORATION
Electrical Products Division
Service Department
2645 Federal Signal Drive
University Park, IL 60466-3195
Part Number
K8449078B
K8449078B-01
K8449078B-02
K8449078B-03
K8449078B-04
K8449080B
K8241A013-02
KR81-05-01
K8449083B
K7011A062-14
K8449090A
3