Input Quantity Auto; Re-Check Function - König Electronic CMP-BARSCAN60 Manual De Uso

8.1.2 Input quantity auto:

Press the scanner button to scan the PLU barcode. Then it will show:
Press the scanner button to save the information. So the quantity will be saved as one
unit. If you want to clear the scanned quantity you can press the 'CLEAR' button.

8.1.3 Re-check function:

When you set 'INPUT QUANTITY AUTO' in 'MODE', it
shows 'AUTO'
The default quantity is 0.000
Please press 'ADD', and the Information will be saved
Press key 'MODE'
Choose 'RE-CHECK FUNCTION', press 'ENTER'
12