Inlet Air Filters Maintenance; Exhaust Air Filter Maintenance; Replacing The Filter - Collection Bag; Replacing The Power Cable - Coma caisextra Manual De Uso Y Mantenimiento

Carefully cleaning the intake air filter prolongs the life of the
appliance. To clean the filter, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see "MACHINE SAFETY'").
2. Release the vacuum tank lid (1) using the handle (2) on the front
of the collection tank, turn the handle clockwise (Fig.12).
3. Using the handle (3), in the vacuum tank lid (Fig.13), remove the
vacuum tank lid from the collection tank (rotating it and shifting
it as indicated in the figure). Put the vacuum tank lid gently on
the floor.
4. Take out the intake air filter (4) from inside the collection tank
(Fig.22).
5. Clean the filter with a jet of air from a distance of at least 20 cm.
Replace it if damaged.
6. Take out the inlet air sponge filter (5) from inside the collection
Carefully cleaning the exhaust air filter prolongs the life of the
appliance. To clean the filter, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see "MACHINE SAFETY").
2. Turn the catches (1) of the filter compartment lid anti-clockwise
(Fig.24).
3. Remove the filter compartment lid (2) from the appliance (Fig.25).
4. Take the exhaust air filter out of the appliance.
5. Clean the filter with a jet of air from a distance of at least 20 cm.
To replace the filter - collection bag, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see "MACHINE SAFETY").
2. Release the vacuum tank lid (1) using the handle (2) on the front
of the collection tank, turn the handle clockwise (Fig.12).
3. Using the handle (3), in the vacuum tank lid (Fig.13), remove the
vacuum tank lid from the collection tank (rotating it and shifting
it as indicated in the figure). Put the vacuum tank lid gently on
the floor.
4. Remove the filter - collection bag from inside the collection tank
being careful not to rip it. If the bag is made of paper, dispose of it
properly, but if it is made of fabric just empty it.
To replace the power cable of the appliance, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see "MACHINE SAFETY").
2. Release the vacuum tank lid (1) using the handle (2) on the front
of the collection tank, turn the handle clockwise (Fig.12).
3. Using the handle (3), in the vacuum tank lid (Fig.13), remove the
vacuum tank lid from the collection tank (rotating it and shifting
it as indicated in the figure). Put the vacuum tank lid gently on
the floor.
4. Turn the power cable catch (4) 180 degrees anti-clockwise
To dispose of the appliance, take it to a demolition centre or an
authorised collection centre.
Before scrapping the machine, it is necessary to remove and
separate out the following materials, then send them to the
appropriate collection centres in accordance with the environmental
hygiene regulations currently in force:
• Felt
• Electric and electronic parts*
• Plastic parts
• Metallic parts
(*) In particular, contact your local distributor when scrapping electric
and electronic parts.

INLET AIR FILTERS MAINTENANCE

7. Clean the filter with a jet of air from a distance of at least 20 cm.
8. Repeat the operations in reverse order to reassemble all the

EXHAUST AIR FILTER MAINTENANCE

6. Repeat the operations in reverse order to reassemble all the
REPLACING THE FILTER – COLLECTION BAG
5. Do what is required to replace the filter - collection bag (see

REPLACING THE POWER CABLE

5. Remove the damaged cable.
6. Insert the plug (5) of the new power cable into the socket (6) on
7. Turn the power cable catch (4) 180 degrees clockwise, but before

DISPOSAL

27
tank (Fig.23).
Replace it if damaged.
parts.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
ATTENTION: The place this operation is carried out should
comply with current environmental protection regulations.
Replace it if damaged.
parts.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
ATTENTION: The place this operation is carried out should
comply with current environmental protection regulations.
"INSERTING FILTER – COLLECTION
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
ATTENTION: The place this operation is carried out should
comply with current environmental protection regulations.
(Fig.16).
the appliance (Fig.17).
doing this wind the cable inside its tear-proof housing (7) (Fig.18).
BAG").