V-TAC VT-4012-3 Manual Del Usuario página 6

ASSEMBLY
1: First attach the
Base Surround (12)
to the base of the fan
using the four pozid-
rive screws supplied
(13) Take care not to
overtighten the
screws
Rear guard
locating pins
3: Note the two Rear
Guard locating pins
on the Motor Housing
shown right.
ENGLISH
2: Next place the fan
on its base and
remove the Rear
Guard Fixing nut (4)
from the Motor
Housing (6) by
unscrewing anti-
clockwise (arrowed).
4. Place the Rear
Guard(5) over the
two pins on the
Motor Housing(6)
and replace the Rear
Guard Fixing nut(4)
and screw it back on
clockwise.
NB ensure that the
guard is fitted such
that Carry Han-
dle(14) is at the top.