Quick Start - Prestigio PBSP1 Serie Manual Del Usuario

Quick Start

1. Make sure the Bluetooth speaker has electricity and Press " " button, you will
hear a beep sound in 3 seconds.
2. After turning the speaker on, the LED indicator should flash every 0.5 seconds,
it's in "pairing mode."
3. The speaker is now ready to connect to your Bluetooth enabled device.
Please refer to your Bluetooth enabled device's instruction manual for pairing
instructions if you are unsure how to do this.
Pairing with Bluetooth enabled devices
Pairing by NFC:
1. Make sure your device has NFC function.
2. Ensure the Bluetooth Speaker is powered off and your device is powered on.
3. Take your device touch "
power on automatically, your device will show "Connecting to PBSP1", the red
LED will flash every 0.5 seconds, it's in "pairing mode". Touch "
will hear a beep sound and the red LED will flash every 2 seconds to indicate
the paring is successful.
4. Touch once again and your device will disconnect from the speaker.
Note:
‧No NFC app request for Android V4.1 and above, for other version, please
download free NFC app from app store or contact your phone provider for
more information.
Pairing by Bluetooth:
1. Make sure the Bluetooth speaker is powered on .
2. Perform a device discovery scan for other Bluetooth devices from your device.
3. Select the 'PBSP1' in the list of discovered devices.
4. In some devices you will need to enter the Bluetooth pass code "0000" when
pairing, or connect to the speaker separately after pairing.
5. If the pairing is successful, you will hear a beep sound and the red LED will flash
approximately every 2 seconds.
EN – 2
" shows on the speaker once, the speaker will
"again, you
Bluetooth wireless speaker