Prestigio PBHS2 Manual Del Usuario página 4

3). Place both devices not more than one metre away from each other.
4). Press the power button on the headphone to turn it on. The blue LED will start flashing every second.
Press the Play/pause button for about 2 seconds, you will hear "ready to pair", this indicates that the
headphone has entered pairing mode.
5). When the product name "PBHS2" appears on your phone, press "pairing".
6). If the pairing is successful, the blue LED will stay alight.
Please note: If your laptop/phone device is under version 2.1, please enter the passkey ="0000"(4 zero).
• Pairing the headphone with your phone by NFC
1). Make sure the headphone is off.
2). Turn on "NFC" on your phone.
3). Press the power button on the headphone to turn it on.
4). Touch the back of your phone to the headphone. There will be an indication sound when the
headphone enter pairing mode.
5). If the pairing is successful, the blue LED will stay alight.
3. Answering and ending a call using your mobile phone
• When there is an incoming call, the headphone will ring.
• Briefly press the power button to answer an incoming call. Music playback pauses temporarily.
• To end a call, simply tap the power button once again. As soon as you hang up, music playback resumes
automatically.
Specification
1. Mic. Spec.:
• Microphone Unit: ￠ 4*1.5mm
• Directivity: omnidirectional
• S.P.L: -42±3dB
• Impedance: ≤2.2KΩ
• Frequency response: 20Hz-20,000Hz
• Operating Voltage: 2V
2. Speaker Spec.:
• Speaker diameter: ￠ 40mm
• Impedance: 32Ω
• S.P.L: 118±3dB S.P.L at 1KHZ
• Rated power: 20mW
• Aggregate capability: 40mW
• Frequency response: 20Hz-20,000Hz
3. Power:
• Battery type: Built-in 250mAh Lithium-polymer rechargeable battery
• Charging connector type: Micro USB 5V/1A
• Run time: Up to 8 hours of talking or music playback time
• Standby time: 100 hours
• Charging time: 3 hours
4. Built-in 3.5mm audio input jack, can connect an external audio device
Attention
• If you cannot power on the headphone, please check your power and charge it.
• Please remember to power off the headphone when you are not using it.
• If you haven't used the headphone for a long time, pls. charge it before using.
• Do NOT disassemble, repair or modify the headphone by yourself.
• Do NOT store the device in a place with high humidity or dust.
• No NFC app request for Android V4.1 and above, for other version, please download free NFC app from app
store or contact your phone provider for more information.
EN-2