Using The Computer - LG Electronics FB790GB Manual Del Usuario

Connecting the Monitor

Using the Computer

1.
Connect the signal cable. When mated, tighten the thumbscrews to secure the
connection.
2.
Connect the power cord into a properly power outlet that is easily accessible and
close to the monitor.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your monitor
may differ from the view as shown.
*
Wall-outlet type
Power Cord
*
PC-outlet type
PC
MAC
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
A4
Signal Cable
Analog signal
Digital signal
D-sub
*
- DVI
* Varies according to model.
*