Descargar Imprimir esta página

Installation Instructions - EFF EFF 12 wd Serie Instruciones De Instalacion

Calefacción para abridor eléctrico de puertas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Heating for electric strike
elf-adhesive heating foil 12 V / 24 V, 2.5 W suitable for model series 12 wd, 22 wd, 112, 102
3
Electrical connection
T
he heating element can be operated at a rated operating voltage of 12 V or 24 V. The power consumption in both cases is
The heating foil is connected at the pigtail leads soldered onto the film in accordance with one of the circuit diagrams reproduced below,
depending on the operating voltage.
Wire the element in such a way that it is always energized. To save energy, we advise providing an on-off switch for summertime use.
Ensure that the rated operating voltages of all connected elements are in agreement with the diagram.
Specifications
Operating voltage
Ambient temperature
Current consumption
Shelf life
Protection rating DIN 40050
The film is insensitive to weak acidic and alkaline solutions
Terminal diagrams
24 V
Actuating contact
effeff Fritz Fuss GmbH&Co
Kommanditgesellschaft auf Aktien
Bildstockstraße 20
72458 Albstadt
Tel.: 07431-1230 Fax: 123 240
Deutschland
www.effeff.com
infotoe@effeff.com
An ASSA ABLOY Group company

Installation instructions

The heating foil is glued onto the back of the strike housing.
1) Remove the rating plate on the back of the housing (noting the data if
applicable).
2.) Clean the metal surface using a light solvent (such as cleaning
petroleum spirit) to ensure a grease-free, dry surface.
3.) Pull off the backing paper from the heating oil and stick onto the
back of the strike housing in around the position shown on the left.
4.) Smooth down the film and press it well onto the housing.
In the area of the crimped terminals, the heating foil stands around
3 mm proud. Ensure that there is sufficient space allowed for this
in the recess prepared for the strike.
12 V/24 AC/DC +20%
max. 60°C
max. 125 mA at 24 V
max. 250 mA at 12 V
2 years at 20°C, 50% humidity
IP 54
On-off switch
for summertime use
(optional)
Heating element
760-13
12 V
Actuating contact
ASSA ABL OY
Sicherheit und Präzision
GB
2.5 W.
On-off switch
for summertime use
(optional)
Heating element

Publicidad

loading

Este manual también es adecuado para:

22 wd serie112 serie102 serie760-13