Configuring The Ssd As The Primary Boot Device; Migrating Pc Data To The Ssd - Toshiba HDTS106XZSWA Manual De Instrucciones

8 Perform the data migration procedure:
the SSD" on page
At the end of the data migration procedure, the PC shuts down.
You may then remove the HDD from your PC or keep it as
secondary storage.

Configuring the SSD as the primary boot device

After you have transferred the data from the previous storage to the
SSD, you can configure the SSD as the primary boot device.
To configure the SSD as the primary boot device:
1 Turn on your PC.
2 In the BIOS menu, configure SSD as the primary boot device.
(For more information, refer to system help or the manual for
your PC.)
3 Restart your PC.
Your SSD is now available to boost your PC performance.

Migrating PC data to the SSD

NOTE
Before you can do this procedure, you must connect the SSD to
your notebook or desktop computer, see
Notebook PC" on page 10
on page
To migrate PC data to the SSD:
1 Be sure all programs are closed.
2 Install the Data Migration Software as follows:
❖
❖
3 Perform Data Migration.
❖
❖
15.
Please make sure to back up all data on your storage device prior to
running the data migration software.
13.
In Windows Explorer, locate the Data Migration Software
folder in the SSD volume.
Double-click setup.exe, and follow the screen prompts.
Make sure no other programs are running.
Launch the migration software.
Migrating PC data to the SSD
or "Installing the SSD to a Desktop PC"
Installation
"Migrating PC data to
"Installing the SSD to a
15