Publicidad
Pic. 24
Turn power off.
Fill the tank with tepid water and empty it just using the tap (see Pict.24 & 25)
For an easy removal of the bowl. Please follow instructions shown in Pictures
26 & 27.
Pic. 26
Place fingers under the front lower part
of the bowl, near the tap, and push
upwards until legs pop out.
ATTENTION: Place all the components in a safe place in order to be sure they are not lost.
Clean the components with dish-washing soap and tepid water. Never use abrasive cleaners.
NOTE: Do not use too hot water to clean the plastic components .
13
Basic Sanitizing operations
Pic. 25
Pic. 27
Place fingers behind the bowl legs and
pull the bowl onwards slowly until it has
been completely removed.
Publicidad
