Charging Your Hands-Free Sf605; Bluetooth Pairing; Using Your Hands-Free Sf605 - Southwing SF605 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
2. CHARGING YOUR HANDS-FREE
Use only the vehicle power charger
provided.
The SF605 uses a rechargeable
battery that must be fully charged
before you use it for the first time.
Connect the supplied vehicle
power charger to the power socket
and then to your Hands-free. The
Power LED will be red while char-
ging and change to green when
the Hands-free is fully charged. It
takes approximately 2 hours to
fully charge the Hands-free.
NOTICE:
The LED3 will flash red every second
when the battery is low.

3.BLUETOOTH PAIRING

You will need to follow the steps
below if you want to pair your
Hands-Free with another mobile
phone.
1. Turn on both devices. For the
Hands-free, press and hold the
Multi-function button for 2
seconds.
2. Place the Hands-free in pairing
mode by pressing and holding the
Vol- button for 5 seconds. When
you hear a rising tone and the
LED1 begins fast flashing release
the button.
3. Use your phone's menu to
search for Bluetooth audio devices
4
and select "SouthWing SF605"
when it appears on the display.
4. Enter the PIN number: 0000
If the pairing is successfully made,
the Hands-free will be Bluetooth-
connected to the phone and
usually this is indicated on the
phone display. Please refer to your
phone manual. When disconnec-
ted, the Hands-free can be recon-
nected to the phone by simply
short pressing the Multi-function
button.
4. USING YOUR HANDS-FREE
Power On / Off
Press the Multi-function button for
two seconds in order to turn on /
off the device.
Connect the Hands-free to the phone
When disconnected, the Hands-
free can be reconnected to the
phone by simply short pressing the
Multi-function button.
Disconnect the Hands-free from the
phone
In active mode, press the Vol +
and Vol - buttons simultaneously
for a second.
Answer / End / Place a call
To answer a call, short press the
Multi-function button.
To end a call, long press the Multi-
function button for two seconds.
To place a call using voice dialling,
short press the Multi-function but-
ton.
During a call, you can transfer it
from your phone to your Hands-
free by pressing the Multi-function
button twice.
Call transfer back to phone
To transfer a call from your Hands-
free to your phone, press the
Multi-function button twice.
Reject a call
To reject an incoming call without
answering when the Hands-free is
ringing, long press the Multi-func-
tion button.
Last number redial
To redial the last number, press the
Multi-function button twice.
Volume Up / Down
During a call, press the Vol + or
Vol - button to adjust the volume.
Mute / Un-mute
Press the Vol + and Vol - buttons
simultaneously.
Auto Power Off
The power is turned off automati-
cally (after one hour of stand-by).
Auto Reconnection
If the SF605 is already on, it auto-
matically reconnects to the last
phone used.
Reset
To reset the SF605, stick a pin into
the hole of the side as indicated.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido