Mopar 82212422 Instrucciones De Montaje página 4

4
9. Remove the six screws (4) that secure the front belly pan (2) to the underside of the vehicle's front fascia.
10. Remove the six screws (1) that secure the front belly pan (2) to the underside of the vehicle's front wheel house
splash shield.
11. Remove the four push pin fasteners (3) that secure the front belly pan (2) to the underside of the vehicle's lower
crossmember.
12. Remove the front belly pan (2) from the underside of the vehicle.
13. If equipped, disconnect the harness (2) from the fog
lamp (1). Repeat on the opposite side.
14. If equipped, disconnect the adaptive speed control
harness near the RH fog lamp.
Sep 19, 2011 K6861077